SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-005
B-53
Common Error Messages
-00036
Cause. The particular value specified with the named attribute conflicts with one of the
other attribute values for the object.
Effect. SCF waits for the next command.
Recovery. Specify a different value or delete the attribute and retry the command.
-00037
Cause. The command power level specified on the command is too weak for the state
of named object.
Effect. SCF waits for the next command.
Recovery. Retry the command with a higher command power level, for example,
using the FORCED option.
-00038
Cause. The command power level specified on the command is insufficient to change
the state of the object.
Effect. SCF waits for the next command.
Recovery. Retry the command with a higher command power level, for example,
using the FORCED option.
-00039
Cause. This command does not apply to this object.
Effect. SCF waits for the next command.
Recovery. See the SCF reference manual for subsystem for a more complete
description of all commands that apply to this object type.
subsystem {E|W}-00036 Value of attribute attribute-name may
not be used in conjunction with other attribute(s) for
object-name.
subsystem {E|W}-00037 Command power level too weak for the
state of object object-name.
subsystem {E|W}-00038 Command power level too weak for the
condition of object object-name.
subsystem {E|W}-00039 Command not supported by object-name.