SCF Reference Manual for G-Series RVUs (G06.27+)

SCF Error Messages
SCF Reference Manual for G-Series RVUs—520413-005
B-62
Common Error Messages
-00858
Cause. The TRACE collector has encountered an internal error.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00859
Cause. The manager of the traced subsystem does not respond to the trace request.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00860
Cause. A file-system error identified by err-num occurred when the TRACE collector
attempted to open $RECEIVE.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00861
Cause. A file-system error identified by err-num occurred when the TRACE
PROCEDURE attempted to open $RECEIVE.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
subsystem {E|W}-00858 Trace collector MOM died; Detail =
number.
subsystem {E|W}-00859 Trace collector did not receive go-
ahead interrupt; Detail = number.
subsystem {E|W}-00860 Trace collector’s $RECEIVE file error;
File system error: err-num.
subsystem {E|W}-00861 TRACE PROCEDURE’s $RECEIVE file error;
File system error: err-num.