SCF Reference Manual for G-Series RVUs (G06.27+)

D-Series and G-Series Comparison and Migration
SCF Reference Manual for G-Series RVUs—520413-005
C-19
Using MIGSCF in Command-Line Mode
Option “S” suppresses the output of unconverted commands to rptfile and
newfile.
newfile
is the converted file containing SCF commands. If an existing file is specified, it is
overwritten. If the file does not exist, MIGSCF creates it with the same
characteristics as oldfile.
Considerations
•
The oldfile, rptfile, and newfile variables must be different files.
•
You can optionally specify a subvolume or volume location for oldfile, rptfile,
and newfile.
Examples
1. The following command converts a COUP command file named COUPIN to an
SCF command file named SCFIN01.
> MIGSCF / IN COUPIN , OUT RPT01 / -C SCFIN01
The contents of this COUPIN input file:
COMMENT This is a sample COUP input file
COMMENT 5516 printer on a 3605 controller
ASSUME CONTROLLER
SET PRODUCT 3605
SET PRIMARYCPU (CPU 0, CHANNEL 3, ADDRESS %40)
SET BACKUPCPU (CPU 1, CHANNEL 3, ADDRESS %40)
ADD C3605A
ADD PATH P3605A, PRIMARYCIU C3605A
ASSUME DEVICE
SET MACRO ASYNCTERMPROC
SET PATHNAME P3605A
SET LIU 1
SET PROGRAM $SYSTEM.CSS01.C9322P00
SET SUBDEV1 (PRODUCT 5515, NAME #PTR15A)
ADD $P5515A