SCF Reference Manual for G-Series RVUs (G06.27+)

D-Series and G-Series Comparison and Migration

SCF Reference Manual for G-Series RVUs—520413-005

C-25

Using MIGSCF in Interactive Mode

Consideration

You can enter the following commands at the COUP? or PUP? prompt.

Example 1: Converting a COUP Command

1. To convert a single COUP command to the equivalent SCF command, you enter

MIGSCF from the TACL prompt, for example:

> MIGSCF -C

2. MIGSCF responds with its banner and prompts you to enter a COUP command:

COUP?

3. After you enter the COUP command and press Return, MIGSCF displays its SCF

conversion information and prompts you again. Enter another command if desired.

4. To exit from MIGSCF, press Ctrl-y.

Example 1 looks like the following. User input is shown in bold.

Example 2: Converting a PUP Command

1. To convert a single PUP command to the equivalent SCF command, you enter

MIGSCF from the TACL prompt. For example:

> MIGSCF -P

Command MIGSCF Response

FC (fix command) Allows correction of a previously entered command line.

HELP Describes how to use MIGSCF interactively.

HELP ALL Displays the list of MIGSCF interactive commands.

HISTORY Displays previously entered commands.

command Displays conversion results

>MIGSCF -C

MIGSCF T5816D44 (31MAY97) 16APR97 10:10 PM

This software is an unsupported tool, and is Tandem Computers

Incorporated proprietary and confidential information.

Input file: \LOCAL.$TERM2

Output file: \LOCAL.$TERM2

Conversion mode: PUP

(COUP)? ASSUME DEVICE

The equivalent SCF command is :

ASSUME DEVICE

(COUP)? <CTRL-Y>