SCF Reference Manual for G-Series RVUs (G06.27+)

Using SCF to Configure and Manage NonStop
S-Series Servers
SCF Reference Manual for G-Series RVUs—520413-005
1-20
SCF Configurable Objects on Systems Running
G-Series
SCF Configurable Objects on Systems
Running
G-Series
The following objects can be configured on systems running G-series using SCF.
Protocols
The following table lists the protocols (also called communications subsystems or
access methods) that are configured through the WAN subsystem, as described in the
WAN Subsystem Configuration and Management Manual.
Devices
Configuration information for the following devices is described in the manuals listed:
Processes
Generic processes, as described in the SCF Reference Manual for the Kernel
Subsystem, are also supported on systems running G-series.
Protocol Manual
AM3270 AM3270 and TR3271 Configuration and Management Manual
ATP6100 Asynchronous Terminals and Printer Processes Configuration and
Management Manual
CP6100 CP6100 Configuration and Management Manual
Envoy Envoy Configuration and Management Manual
EnvoyACP/XF EnvoyACP/XF Configuration and Management Manual
Expand Expand Configuration and Management Manual
SNAX SNAX/XF and SNAX/APN Configuration and Management Manual
TR3271 AM3270 and TR3271 Configuration and Management Manual
X.25 X25AM Configuration and Management Manual
Device Manual
Disk drives
Tape drives
SCF Reference Manual for the Storage
Subsystem
WAN-connected terminals and printers Asynchronous Terminals and Printer
Processes Configuration and Management
Manual
LAN-connected terminals and printers LAN Configuration and Management Manual