SCF Reference Manual for G-Series RVUs (G06.27+)

Using SCF to Display Your System’s Configuration
SCF Reference Manual for G-Series RVUs—520413-005
2-11
Storage Subsystem Information
Example 17
INFO DISK $SYSTEM, DETAIL
==Lists detailed information about one disk, $SYSTEM
STORAGE - Detailed Information Magnetic DISK \SUN.$SYSTEM
Common Disk Configuration Information:
*BackupCpu............................. 1
*HighPin............................... ON
*PrimaryCpu............................ 0
*Program............................... $SYSTEM.SYSTEM.TSYSDP2
*StartState............................ STARTED
Disk Type Specific Information:
*AuditTrailBuffer (MB)................. 0
*AutoRevive............................ OFF
*AutoSelect............................ n/a
*AutoStart............................. ON
*CBPoolLen............................. 1000
*FSTCaching............................ OFF
*FullCheckpoints....................... ENABLED
*HaltOnError........................... 1
*LKIDLongPoolLen....................... 8
*LKTableSpaceLen....................... 15
*MaxLocksPerOCB........................ 5000
*MaxLocksPerTCB........................ 5000
*NumDiskProcesses...................... 6
*OSSCaching............................ ON
*PhysvolSelect......................... n/a
*Pool.................................. None
*ProtectDirectory...................... SERIAL
*ReviveBlocks.......................... 1
*ReviveInterval........................ 100
*SerialWrites.......................... ENABLED
Primary Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
Disk Device ID........................ 0
Location (Group,Module,Slot).......... (1,1,11)
SAC Name.............................. $ZZSTO.#PMF.SAC-2.GRP-1.MOD-1.SLOT-50
SAC ID................................ 6
SAC Sub Device........................ 2
Backup Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
Disk Device ID........................ 0
Location (Group,Module,Slot).......... (1,1,11)
SAC Name.............................. $ZZSTO.#PMF.SAC-2.GRP-1.MOD-1.SLOT-55
SAC ID................................ 7
SAC Sub Device........................ 2
Mirror Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
Disk Device ID........................ 0
Location (Group,Module,Slot).......... (1,1,12)
SAC Name.............................. $ZZSTO.#PMF.SAC-1.GRP-1.MOD-1.SLOT-55
SAC ID................................ 7
SAC Sub Device........................ 1
Mirror Backup Path Information:
Adapter............................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
Disk Device ID........................ 0
Location (Group,Module,Slot).......... (1,1,12)
SAC Name.............................. $ZZSTO.#PMF.SAC-1.GRP-1.MOD-1.SLOT-50
SAC ID................................ 6