SCF Reference Manual for the Kernel Subsystem

• This example gives detailed configuration information about the $ZZKRN subsystem manager
process:
-> INFO PROCESS $ZZKRN.#ZZKRN, DETAIL
NONSTOP KERNEL - Detailed Info PROCESS \SUN.$ZZKRN.#ZZKRN
*AutoRestart...............10
*BackupCPU.................1
*CPU.......................Not Specified
*DefaultVolume.............$SYSTEM.SYSTEM
*ExtSwap...................Not Specified
*Highpin...................ON
*HomeTerminal..............$ZHOME
*InFile....................Not Specified
*Library...................Not Specified
*MemPages..................Not Specified
*Name......................$ZZKRN
*OutFile...................$ZHOME
*PFSSize...................Not Specified
*PrimaryCPU................0
*Priority..................180
*Program...................$SYSTEM.SYSTEM.OZKRN
*SaveAbend.................ON
*StartMode.................KERNEL
*StartupMessage............<BCKP-CPU>
*StopMode..................STANDARD
*Type......................OTHER
*UserId....................SUPER.SUPER ( 255,255 )
• This example gives detailed configuration information about the #TEMP generic process.
Because #TEMP was configured to start in all processors (the CPU value is ALL), the name is
the configured name ($GP) plus two digits representing the processor number part of the
name.
-> INFO PROCESS $ZZKRN.#TEMP, DETAIL
NONSTOP KERNEL - Detailed Info PROCESS \EAST.$ZZKRN.#TEMP
*AutoRestart...............10
*BackupCPU.................Not Specified
*CPU.......................ALL
*DefaultVolume.............$SYSTEM.NOSUBVOL
*ExtSwap...................Not Specified
*Highpin...................ON
*HomeTerminal..............Not Specified
*InFile....................Not Specified
*Library...................Not Specified
*MemPages..................Not Specified
*Name......................$GP08
*OutFile...................Not Specified
*PFSSize...................Not Specified
*PrimaryCPU................Not Specified
*Priority..................148
*Program...................$SYSTEM.SYSTEM.O999GP
*SaveAbend.................OFF
*StartMode.................APPLICATION
*StartupMessage............Not Specified
*StopMode..................STANDARD
*Type......................OTHER
*UserId....................SUPER.SUPER ( 255,255 )
• This example gives detailed configuration information about the $ZHOME process.
-> INFO PROCESS $ZZKRN.#ZHOME, DETAIL
104 SCF Commands for the Kernel Subsystem