SCF Reference Manual for the Kernel Subsystem

NONSTOP KERNEL - Names SERVERNET \system.$ZSNET
SERVERNET
$ZSNET
$ZSNET.X.0 $ZSNET.Y.0
$ZSNET.X.1 $ZSNET.Y.1
$ZSNET.X.2 $ZSNET.Y.2
$ZSNET.X.3 $ZSNET.Y.3
$ZSNET.X.4 $ZSNET.Y.4
$ZSNET.X.5 $ZSNET.Y.5
$ZSNET.X.6 $ZSNET.Y.6
$ZSNET.X.7 $ZSNET.Y.7
$ZSNET.X.8 $ZSNET.Y.8
$ZSNET.X.9 $ZSNET.Y.9
$ZSNET.X.10 $ZSNET.Y.10
$ZSNET.X.11 $ZSNET.Y.11
$ZSNET.X.12 $ZSNET.Y.12
$ZSNET.X.13 $ZSNET.Y.13
$ZSNET.X.14 $ZSNET.Y.14
$ZSNET.X.15 $ZSNET.Y.15
This term appears in the preceding display:
A list of the SERVERNET objects associated with the $ZZKRN Kernel subsystem manager, in the
form of the $ZSNET process name, an X fabric or Y fabric designation, and a processor number.
All possible processors are listed, regardless of how many are up.
SERVERNET
NAMES SUBSYS Command
Use the NAMES SUBSYS command to display a list of PROCESS objects associated with the
$ZZKRN process.
NAMES [ / OUT file-spec / ] SUBSYS $ZZKRN
SUBSYS $ZZKRN
is the name of the ServerNet manager process. You can omit SUBSYS and $ZZKRN if you
have specified them in an ASSUME command.
NAMES SUBSYS Consideration
Wild cards are not supported for the NAMES SUBSYS command.
NAMES SUBSYS Display Format
The format of the display for the NAMES SUBSYS command is described here.
NONSTOP KERNEL - Names SUBSYS \system.$ZZKRN
Subsys
$ZZKRN
Process
$ZZKRN.#gpname1 $ZZKRN.#gpname2
$ZZKRN.#gpname3 $ZZKRN.#gpname4
These terms appear in the preceding display:
The name of the $ZZKRN Kernel subsystem manager process.Subsys
An alphabetized two-column list of the PROCESS objects associated with the $ZZKRN Kernel
subsystem manager process.
Process
NAMES SUBSYS Example
This example shows how to list the SUBSYS objects associated with the Kernel subsystem manager
process:
114 SCF Commands for the Kernel Subsystem