SCF Reference Manual for the Kernel Subsystem

• Wild-card support is limited to the trailing asterisk (*) for #gpname.
• The START PROCESS command is not supported for the $ZZKRN Kernel subsystem manager
process. (The $ZPM persistence manager ensures that $ZZKRN remains up at all times.)
Consideration for OSS Persistent Processes
When you START an OSS persistent process object, you start the processes specified in its NAME
and ASSOCPROC attributes.
START PROCESS Example
This example shows how to start the process $ZZKRN.#TEMP:
-> START PROCESS $ZZKRN.TEMP
START SERVERNET Command
Use the START SERVERNET command to start a ServerNet fabric.
START [ / OUT file-spec / ]
SERVERNET $ZSNET.{X|Y}.{cpu |*}
$ZSNET.{X|Y}.{cpu|*}
is the name of a ServerNet fabric (X or Y) and the processor number (cpu). You can omit
SERVERNET and $ZSNET if you specified them with an ASSUME command.
START SERVERNET Considerations
• The asterisk (*) wild-card character specifies all available processors.
• The START SERVERNET command tells a specific processor to begin using a specific ServerNet
fabric.
• For complete information about using this command when adding an enclosure or upgrading
memory, see the NonStop S-Series Hardware Installation and FastPath Guide, the appropriate
NonStop NS-series hardware installation guide, or the NonStop BladeSystem Hardware
Installation Manual.
START SERVERNET Display Format
The format of the display for the START SERVERNET command is described here.
NONSTOP KERNEL - Start SERVERNET $ZSNET.XorY.cpu
XorY-FABRIC
TO 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
FROM
0 st st st st st st st st st st st st st st st st
1 st st st st st st st st st st st st st st st st
2 st st st st st st st st st st st st st st st st
3 st st st st st st st st st st st st st st st st
4 st st st st st st st st st st st st st st st st
5 st st st st st st st st st st st st st st st st
6 st st st st st st st st st st st st st st st st
7 st st st st st st st st st st st st st st st st
8 st st st st st st st st st st st st st st st st
9 st st st st st st st st st st st st st st st st
10 st st st st st st st st st st st st st st st st
11 st st st st st st st st st st st st st st st st
12 st st st st st st st st st st st st st st st st
13 st st st st st st st st st st st st st st st st
14 st st st st st st st st st st st st st st st st
15 st st st st st st st st st st st st st st st st
XorY
indicates whether the X or Y fabric is being started.
116 SCF Commands for the Kernel Subsystem