SCF Reference Manual for the Kernel Subsystem

Recovery
To stop a subsystem manager, you must specify its complete name in an ABORT command.
00037
KRN 00037 Other processes of objname considered ABORTED;
CPU currently down.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
One or more of the processes represented by this generic process were configured in processors
that are down or nonexistent. These processes are now considered ABORTED and will not be
started when their processor comes up.
Effect
SCF waits for the next command.
Recovery
Informational message only; no corrective action is needed.
00038
KRN 00038 The USERID specified for attribute USERID for objname
is not known to this system.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
The value given for USERID is not a known user ID on this system.
Effect
SCF waits for the next command.
Recovery
Be sure that this is the correct entry that you want, because this will not be checked other than
through an attempted START. If this is not the USERID value you intend to use, use the ALTER
command to correct the value.
00039
KRN 00039 Generic Process objname is a Subsystem Manager,
and is not deleted.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
This generic process is a subsystem manager. Subsystem managers cannot be removed by a
DELETE command using a wild card (*).
Effect
SCF waits for the next command.
Recovery
To remove a subsystem manager, you must specify its complete name in a DELETE command.
00040
KRN 00040 Generic Process objname not deleted:
Not all its processes are stopped.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
146 SCF Kernel Subsystem Error Messages