SCF Reference Manual for the Kernel Subsystem

For more information on these object types, see:
ChapterObject Type
Chapter 2: Configuring System Attributes (page 27)SUBSYS
Chapter 3: Configuring and Managing Generic Processes (page 38)PROCESS
Chapter 4: Managing the ServerNet Network (page 65)SERVERNET
Displaying Information About Subsystems
You can display information about the generic processes in the table. These generic processes are
subsystem managers or monitor processes:
Refer ToManager or Monitor Process NameSubsystem
15$ZZATM, the Asynchronous Transfer
Mode (ATM) subsystem manager
ATM
16 and 17$ZZCIP and $ZCMnnCIP
18$ZEXP, the Expand monitor processExpand
19$ZZKRN, the Kernel subsystem
manager
Kernel
20$ZZPAM, the Port Access Method
(PAM) manager process
PAM
20$ZMnn, the Query I/O (QIO) monitor
process
QIO
21$ZZFOX, the FOX monitor processServerNet/FX Adapter
22$ZZLAN, the ServerNet LAN Systems
Access (SLSA) subsystem manager
SLSA
23$ZZSTO, the Storage subsystem
manager
Storage
25$ZZWAN, the Wide Area Network
(WAN) subsystem manager
WAN
Displaying Information About the ATM Subsystem Manager
Information about the ATM subsystem manager is documented in the ATM Configuration and
Management Manual. You can use the SCF STATUS and INFO commands to display information
about the $ZZATM ATM subsystem manager. (The NAMES command is not supported for $ZZATM
in the Kernel subsystem.)
• The STATUS command displays dynamic state information about $ZZATM:
-> STATUS PROCESS $ZZATM, DETAIL
NONSTOP KERNEL - Detailed Status PROCESS \SUN.$ZZKRN.#ZZATM
Backup PID........ None
Creation Time..... JAN 21,2000 12:41:59
Name.............. $ZZATM
OwnerID........... 255, 255
Primary PID....... 0 , 21
Priority.......... 180
State............. STARTED
Substate..........
• This INFO command displays the configured attributes of $ZZATM:
Displaying Information About Subsystems 15