SCF Reference Manual for the Kernel Subsystem

Effect
SCF waits for the next command.
Recovery
Be sure that this is the correct entry that you want, because this will not be checked other than
through an attempted START. If this is not the HOMETERM value you intend to use, use the ALTER
command to change to the appropriate home terminal.
00102
KRN 00102 Generic Process objname not altered:
Not all its processes are stopped.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
The ALTER command failed because not all the processes controlled by this generic process are
in the STOPPED state.
Effect
SCF waits for the next command.
Recovery
Use the ABORT command on a generic process before using the ALTER command. A generic
process must be in the STOPPED state in order for the ALTER command to work.
00103
KRN 00103 The device specified for attribute for
objname was not located.
attribute
is an object attribute.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
The device does not currently exist.
Effect
SCF waits for the next command.
Recovery
Be sure that this is the correct entry that you want, because this will not be checked other than
through an attempted START. If this is not the entry you intend to use, use the ALTER command
after starting the process to change to the appropriate entry.
00104
KRN 00104 The KRN subsystem manager, Generic Process $ZZKRN, cannot be aborted.
Cause
You attempted to abort the $ZZKRN subsystem manager, but the $ZZKRN subsystem manager
cannot be aborted.
Effect
SCF waits for the next command.
Recovery
Informational message only; no corrective action is needed.
00105
KRN 00105 Generic Process objname cannot be altered or deleted:
inconsistent status response from $ZPM.
SCF Error Messages 165