SCF Reference Manual for the Kernel Subsystem

Recovery
Use the HELP KERNEL command to list supported commands.
-00008
KRN E-00008 Internal error: SPI buffer larger than expected for objname.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
A command has been issued, and the byte count read by a file-system procedure (for example,
READUPDATE) is smaller than the used-length value in the command buffer.
Effect
SCF terminates.
Recovery
As described under “If You Have to Call Your Service Provider” (page 135), save pertinent
information and contact your service provider.
-00014
KRN E-00014 Unable To Obtain Memory: text for objname.
text
is a text string issued by SCF.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
This subsystem is unable to obtain memory space. Typically, this error indicates a resource
availability problem caused by a large amount of activity (assuming that the configuration is
proper for the operating environment and that the associated hardware is functioning normally).
Effect
SCF waits for the next command.
Recovery
Attempt to determine and correct the problem, or wait awhile before reissuing the request.
-00016
KRN E-00016 Object objname is already in state state.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
state
is the state of the generic process.
Cause
A request that would change the state of an object has been issued, but the object is already in
that state.
Effect
SCF waits for the next command.
Recovery
Informational message only; no corrective action is needed.
-00017
KRN E-00017 Object objname not found
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
174 SCF Kernel Subsystem Error Messages