SCF Reference Manual for the Kernel Subsystem

Cause
There are two possible causes:
1. The specified objname could not be found within this subsystem. This can mean that the
object has not been added yet, or the command refers explicitly to an object and no object
of that type is supported by this subsystem.
2. You have loaded a new version of the system configuration database and no record of
objname exists.
Effect
SCF waits for the next command.
Recovery
Either add the missing object, correct the object name, or correct the object type. Then retry the
original command.
-00018
KRN E-00018 Object type is not supported by this subsystem.
Cause
This object type is not supported. An invalid, unknown, or unsupported object type has been
encountered.
Effect
SCF waits for the next command.
Recovery
Correct the object type and retry the command.
-00019
KRN E-00019 Invalid object name: objname
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
There are two possible causes:
1. An invalid template for objname was found in the command buffer.
2. You have loaded a new version of the system configuration database and no record of
objname exists.
Effect
SCF waits for the next command.
Recovery
Take one of these actions, depending on the cause:
1. Correct the object name syntax and retry the command.
2. Either add the missing object, correct the object name, or correct the object type. Then retry
the original command.
-00022
KRN E-00022 Security violation for objname.
objname
is the new name of a generic process, in the form $ZZKRN.#gpname.
Cause
A sensitive command has been entered by a user unauthorized to issue such a command. Unless
this subsystem has assumed control over command security, SCP generates this error.
Effect
SCF waits for the next command.
Common Error Messages 175