SCF Reference Manual for the Kernel Subsystem

*MemPages......................Not Specified
*Name..........................$ZCMnn
*OutFile.......................$ZHOME
*PFSSize.......................Not Specified
*PrimaryCPU....................Not Specified
*Priority......................146
*Program.......................$SYSTEM.SYSTEM.CIPMON
*SaveAbend.....................OFF
*StartMode.....................SYSTEM
*StartupMessage................Not Specified
*StopMode......................SYSMSG
*Type..........................OTHER
*UserId........................SUPER.SUPER ( 255,255 )
Displaying Information About the Expand Monitor Process
Information about the Expand monitor process is documented in the Expand Configuration and
Management Manual. You can configure this process through TACL or SCF. You can use the SCF
STATUS and INFO commands to display information about the $ZEXP Expand monitor process.
(The NAMES command is not supported for $ZEXP in the Kernel subsystem.)
• The STATUS command displays dynamic state information about $ZEXP:
-> STATUS PROCESS $ZEXP, DETAIL
NONSTOP KERNEL - Detailed Status PROCESS \SUN.$ZZKRN.#ZEXP
Backup PID........ None
Creation Time..... JAN 21,2000 10:41:59
Name.............. $ZEXP
OwnerID........... 255, 255
Primary PID....... 0 , 229
Priority.......... 180
State............. STARTED
Substate..........
• This INFO command displays the configured attributes of $ZEXP:
-> INFO PROCESS $ZEXP, DETAIL
NONSTOP KERNEL - Detailed Info PROCESS \SUN.$ZZKRN.#ZEXP
*AutoRestart...............10
*BackupCPU.................1
*CPU.......................Not Specified
*DefaultVolume.............$SYSTEM.NOSUBVOL
*ExtSwap...................Not Specified
*Highpin...................ON
*HomeTerminal..............$ZHOME
*InFile....................Not Specified
*Library...................Not Specified
*MemPages..................Not Specified
*Name......................$ZEXP
*OutFile...................$ZHOME
*PFSSize...................Not Specified
*PrimaryCPU................0
*Priority..................180
*Program...................$SYSTEM.SYSTEM.OZEXP
*SaveAbend.................OFF
*StartMode.................SYSTEM
*StartupMessage............<BCKP-CPU>
*StopMode..................STANDARD
*Type......................OTHER
*UserId....................SUPER.SUPER ( 255,255 )
18 Kernel Subsystem Overview