SCF Reference Manual for the Kernel Subsystem

NONSTOP KERNEL - Detailed Status PROCESS \SUN.$ZZKRN.#QIOMON
Backup PID........ None
Creation Time..... JAN 17,2000 11:41:59
Name.............. $ZM01
OwnerID........... 255, 255
Primary PID....... 1 , 8
Priority.......... 201
State............. STARTED
Substate..........
• This INFO command displays the configured attributes of QIOMON:
-> INFO PROCESS $ZZKRN.#QIOMON, DETAIL
NONSTOP KERNEL - Detailed Info PROCESS \SUN.$ZZKRN.#QIOMON
*AutoRestart...............10
*BackupCPU.................Not Specified
*CPU.......................All
*DefaultVolume.............$SYSTEM.SYSTEM
*ExtSwap...................Not Specified
*Highpin...................ON
*HomeTerminal..............$ZHOME
*InFile....................$YMIOP.#CLCI
*Library...................Not Specified
*MemPages..................Not Specified
*Name......................$ZM01
*OutFile...................$ZHOME
*PFSSize...................Not Specified
*PrimaryCPU................0
*Priority..................199
*Program...................$SYSTEM.SYSTEM.QIOMON
*SaveAbend.................OFF
*StartMode.................KERNEL
*StartupMessage............Not Specified
*StopMode..................STANDARD
*Type......................OTHER
*UserId....................SUPER.SUPER ( 255,255 )
Displaying Information About the FOX Monitor Process
Information about the FOX monitor process, $ZZFOX, is documented in the ServerNet/FX Adapter
Configuration and Management Manual. You can use the SCF STATUS and INFO commands to
display information about $ZZFOX. (The NAMES command is not supported for $ZZFOX in the
Kernel subsystem.)
• The STATUS command displays dynamic state information about $ZZFOX:
-> STATUS PROCESS $ZZKRN.#ZZFOX, DETAIL
NONSTOP KERNEL - Detailed Status PROCESS \SUN.$ZZKRN.#ZZFOX
Backup PID........ 1 , 317
Creation Time..... JAN 17,2000 11:42:00
Name.............. $ZZFOX
OwnerID........... 255, 255
Primary PID....... 0 , 273
Priority.......... 199
State............. STARTED
Substate..........
• This INFO command displays the configured attributes of $ZZFOX:
-> INFO PROCESS $ZZKRN.#ZZFOX, DETAIL
NONSTOP KERNEL - Detailed Info PROCESS \EAST.$ZZKRN.#ZZFOX
Displaying Information About Subsystems 21