SCF Reference Manual for the Kernel Subsystem

ADAPTER
$ZZLAN.MIOE01
SAC
$ZZLAN.MIOE0.0
PIF
$ZZLAN.MIOE0.0.A
MON
$ZZLAN.#ZLM00 $ZZLAN.#ZLM01 $ZZLAN.#ZLM02 $ZZLAN.#ZLM03 $ZZLAN.#ZLM04
$ZZLAN.#ZLM05 $ZZLAN.#ZLM06 $ZZLAN.#ZLM07 $ZZLAN.#ZLM08 $ZZLAN.#ZLM09
$ZZLAN.#ZLM10 $ZZLAN.#ZLM11 $ZZLAN.#ZLM12 $ZZLAN.#ZLM13 $ZZLAN.#ZLM14
$ZZLAN.#ZLM15
• This INFO command displays the configured attributes of $ZZLAN:
-> INFO PROCESS $ZZKRN.#ZZLAN, DETAIL
NONSTOP KERNEL - Detailed Info PROCESS \SUN.$ZZKRN.#ZZLAN
*AutoRestart...............10
*BackupCPU.................1
*CPU.......................Not Specified
*DefaultVolume.............$SYSTEM.SYSTEM
*ExtSwap...................Not Specified
*Highpin...................ON
*HomeTerminal..............$ZHOME
*InFile....................$YMIOP.#CLCI
*Library...................Not Specified
*MemPages..................Not Specified
*Name......................$ZZLAN
*OutFile...................$ZHOME
*PFSSize...................Not Specified
*PrimaryCPU................0
*Priority..................180
*Program...................$SYSTEM.SYSTEM.LANMAN
*SaveAbend.................ON
*StartMode.................KERNEL
*StartupMessage............<BCKP-CPU>
*StopMode..................SYSMSG
*Type......................OTHER
*UserId....................SUPER.SUPER ( 255,255 )
Displaying Information About the Storage Subsystem Manager
Information about the storage subsystem manager is documented in the SCF Reference Manual
for the Storage Subsystem. You can use the SCF STATUS, NAMES, and INFO commands to display
information about the $ZZSTO storage subsystem manager.
• The STATUS command displays dynamic state information about $ZZSTO:
-> STATUS PROCESS $ZZKRN.#ZZSTO, DETAIL
NONSTOP KERNEL - Detailed Status PROCESS \SUN.$ZZKRN.#ZZSTO
Backup PID........ 1 , 317
Creation Time..... JAN 17,2000 11:42:00
Name.............. $ZZSTO
OwnerID........... 255, 255
Primary PID....... 0 , 273
Priority.......... 180
State............. STARTED
Substate..........
• Because the storage subsystem has no PROCESS objects, you can use the NAMES command
to display the names of all objects controlled by the storage subsystem:
Displaying Information About Subsystems 23