SCF Reference Manual for the Kernel Subsystem

-> NAMES $ZZSTO
STORAGE Names SUBSYS \SUN.$ZZSTO
SUBSYS
$ZZSTO
ADAPTER
$ZZSTO.#SNDA.GRP-1.MOD-1.SLOT-53 $ZZSTO.#SNDA.GRP-1.MOD-1.SLOT-54
DISK
$SYSTEM $D0101 $D0103 $D0105 $D0107 $DSMSCM $AUDIT
MON
$ZSMS
POOL
$POOL6 $POOL5 $POOL4 $POOL3 $POOL2 $POOL1
PROFILE
$ZZSTO.INTERNAL-DISK
SCSI
$SCZT0
TAPE
$TAPE1
• This INFO command displays the configured attributes of $ZZSTO:
-> INFO PROCESS $ZZKRN.#ZZSTO, DETAIL
NONSTOP KERNEL - Detailed Info PROCESS \SUN.$ZZKRN.#ZZSTO
*AutoRestart...............10
*BackupCPU.................1
*CPU.......................Not Specified
*DefaultVolume.............$SYSTEM.SYSTEM
*ExtSwap...................Not Specified
*Highpin...................ON
*HomeTerminal..............$ZHOME
*InFile....................$YMIOP.#CLCI
*Library...................Not Specified
*MemPages..................0
*Name......................$ZZSTO
*OutFile...................$ZHOME
*PFSSize...................Not Specified
*PrimaryCPU................0
*Priority..................180
*Program...................$SYSTEM.SYSTEM.TZSTO
*SaveAbend.................ON
*StartMode.................KERNEL
*StartupMessage............<BCKP-CPU>
*StopMode..................STANDARD
*Type......................SUBSYSTEM-MANAGER
*UserId....................SUPER.SUPER ( 255,255 )
Displaying Information About the FCS Monitor Process
For disk drive enclosures containing M8xxx fibre channel disks, the Fibre Channel Storage (FCS)
Monitor process monitors environmental limits, tracks and reports hardware changes, and issues
control commands to the Environmental Monitoring Unit (EMU). You can use the SCF STATUS and
INFO commands to display information about the FCS Monitor process.
• The STATUS command displays dynamic state information about FCSMON.
-> STATUS PROCESS $ZZKRN.#FCSMON
NONSTOP KERNEL - Status PROCESS \IO.$ZZKRN.#FCSMON
24 Kernel Subsystem Overview