SCF Reference Manual for the Kernel Subsystem

Because the STATUS display shows that all other connections are up, you can replace the failing
PMF CRU. To replace the PMF/SEB or MSEB using TSM, launch the guided procedure from Start
> Programs > Compaq TSM > Guided Replacement Tools > Replace PMF/SEB or MSEB.
Example 2
If the STATUS SERVERNET display looks like this example, a ServerNet expansion board (SEB) or
modular ServerNet expansion board (MSEB) is failing. You can also determine the status of your
SEB or MSEB by viewing related alarms and attributes in the OSM Service Connection or TSM
Service Application. The status conditions indicating that there are access problems are shown in
bold.
-> STATUS SERVERNET $ZSNET
Identifying ServerNet Hardware Failures 67