SCF Reference Manual for the Kernel Subsystem

6 SCF Commands for the Kernel Subsystem
This chapter describes the SCF commands that support the Kernel subsystem:
PageCommand
75ABORT
76ADD
85ALTER
98CONTROL
98DELETE
100INFO
110NAMES
115START
118STATUS
126STOP
128VERSION
Other commands that are generally supported by SCF, such as the ASSUME and ENV commands,
are not documented in this manual. The SCF Reference Manual for G-Series RVUs or the SCF
Reference Manual for J-Series and H-Series RVUs provides general information about SCF
commands. You should be familiar with general SCF usage before using this manual.
PageTopic
73“Supported Commands and Object Types”
74“Sensitive and Nonsensitive Commands”
75“Wild-Card Support ”
Descriptions of SCF commands for the Kernel subsystem
Supported Commands and Object Types
Table 13 lists the SCF commands supported by the Kernel subsystem and the object types to which
they apply. The object types are described in Chapter 5: SCF Object Types and Object Names
(page 69).
Table 13 SCF Commands and Object Types for the Kernel Subsystem
Object Types
SUBSYSSERVERNETPROCESSnullCommand
----X--ABORT
----X--ADD
X--X--ALTER
X------CONTROL
----X--DELETE
X--X--INFO
Supported Commands and Object Types 73