SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Configuring and Managing Storage Pools for
Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-007
9-2
Displaying Information About Storage Pools
Displaying Information About Storage Pools
To display information about storage pools for magnetic disks:
•
Displaying Storage Pool Configuration Information on page 9-2
•
Displaying Storage Pool Status Information on page 9-5
Displaying Storage Pool Configuration Information
The INFO POOL Command (page 14-108) displays configured information about the
storage pool.
Considerations for INFO POOL
•
If the SMF master process ($ZSMS) is not started, the Configuration State in the
INFO report shows that the “SMF master process is Down.”
•
If a configuration record for a storage pool process exists, but the SMF master
process does not have a definition for it, no information is displayed for attribute
values that are supplied by the SMF master process. The Configuration State in
the INFO MON report displays: No Definition with SMF master process.
Example of an INFO POOL Report
-> INFO POOL $POOL3
STORAGE - Info POOL \COMM.$POOL3
*Audited CatalogLocation *Magnetic *Mirrored *Updatestats
ALLOWED $VIRCFG.POOL3CAT REQUIRED REQUIRED 1
Explanation of Fields
* indicates an attribute whose value you can change by using the
SCF ALTER POOL command.
Audited shows whether audited volumes, protected by the TMF product,
are allowed or required in the storage pool.
CatalogLocation the location of the catalog for the storage pool process.
Magnetic
Mirrored
shows whether magnetic or mirrored volumes are allowed or
required in the storage pool.
Updatestats the time interval, in minutes, during which the storage pool
process should collect information about the physical volumes in
the storage pool.