SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Configuring and Managing Storage Pools for
Magnetic Disks
SCF Reference Manual for the Storage Subsystem—529937-007
9-4
Displaying Storage Pool Configuration Information
ExtentThreshold
shows the threshold for remaining extend allocation space at
which the disk processes associated with the physical volume in
the storage pool should generate an EMS warning message.
HighPin
the desired PIN range for the storage pool process.
Magnetic
Mirrored
shows whether magnetic or mirrored volumes are allowed or
required in the storage pool.
Mode
shows whether the storage pool process generates additional
EMS messages.
Monitor
$ZSMS, the name of the SMF master process.
PrimaryCPU
the preferred processor in which the storage pool process
should start its primary process.
Program
the object file name of the storage pool process.
StartState
shows whether the storage pool process is created in a
STARTED or STOPPED state after a system load or processor
load.
UpdateStats
the time interval, in minutes, at which the storage pool process
should collect information about the physical volumes in the
storage pool.
Configuration
State
shows the configuration state for the storage pool process. The
value displayed is:
Fully Defined—The storage pool process has a configuration
record and is defined by the SMF master process ($ZSMS).
No Definition with SMF Master Process—Although there is a
system configuration database record, the SMF master process
indicates it has no definition for the storage pool process. If this
value is displayed, use the SCF DELETE command to remove
the configuration record.
SMF Master Process Down—-Information expected to come
from the SMF master process is not available because the SMF
master process is not available; that is, there is no way to know
whether it exists.
Physical
Volumes
shows all magnetic disk volumes associated with the storage
pool.
Virtual Volumes
shows all virtual disk volumes associated with the storage pool.