SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

What’s New in This Manual
SCF Reference Manual for the Storage Subsystem—529937-007
xv
New and Changed Information in the previous
version
Section 12, Configuring and Managing
Open SCSI Devices
This section has been updated with
information about Open SCSI Fibre
Channel devices:
Configuring Paths for Open SCSI Devices
on page 12-2
New examples for the INFO SCSI
command, with new attribute descriptions.
Adding an Open SCSI Fibre Channel
Device on page 12-9
Section 13, Configuring and Managing
Tape Drives
This section has been updated with
information about Open SCSI Fibre
Channel devices:
Configuring Paths for Tape Devices
on
page 13-2
Fibre Channel Tape Connections
on
page 13-2
New examples for the INFO TAPE
command, with new attribute descriptions.
Adding a Fibre Channel Tape Drive
on
page 13-10
Section 14, Storage Subsystem
Commands
The ADD DISK Command on page 14-8
and the ALTER DISK Command on
page 14-51 have been updated with several
new disk attributes and descriptions.
The ADD PROFILE Attributes
on
page 14-33 and the ALTER PROFILE
Attributes on page 14-76 have been
updated with changes for the NAMEMASK
attribute.
The ADD SCSI Command
on page 14-41
and the ALTER SCSI Command on
page 14-84 have been updated with new
attributes and descriptions.
The ADD TAPE Command
on page 14-45
and the ALTER TAPE Command on
page 14-89 have been updated with new
attributes and descriptions.
The CONTROL DISK Command
on
page 14-93 has been updated with
considerations for M8xxx disks and Integrity
NonStop NS-series servers.
Section (continued) Change (continued)