SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Configuring and Managing Virtual Disks
SCF Reference Manual for the Storage Subsystem—529937-007
10-4
Displaying Configuration Information for Virtual Disks
Example of an INFO DISK Summary Report
-> INFO $VDISK00
Example of a Missing Data Report
If the $ZSMS Storage Management Foundation monitor process is stopped, the report
can look like this:
-> INFO $VDISK00
STORAGE - Info Virtual DISK \COMM.$VDISK00
*ANT ANT *Cache PendOps Pool
Capacity Location Size Location
1000000 $P1D02.ZYS00000.A0001MRG 30000 $P1D02.ZYS00000.A0001MRH $POOL1
Explanation of Fields
* indicates an attribute whose configured value you can change
by using an ALTER DISK command.
ANT Capacity the maximum size (in number of entries) of the audited name
table of the virtual disk.
ANT Location the location of the audited name table of the virtual disk.
Cache Size the size (in number of entries) of the name cache of the virtual
disk process.
PendOps
Location
the location of the pending operations log file of the virtual disk.
Pool the storage pool that the virtual disk is associated with.
STORAGE - Info Virtual DISK \ALM171.$VDISK00
Configuration State
SMF Master Process Down
Configuration State
Fully Defined the virtual disk has a configuration record and is defined by
the SMF master process ($ZSMS).
No Definition With
SMF master process
although a system configuration database record exists, the
SMF master process indicates that the record has no
definition for the virtual disk. If this value is displayed, use the
DELETE DISK Command (page 14-100) to remove the
configuration record.
SMF Master Process
Down
information expected from the SMF master process is not
available because the SMF master process is not available.