SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Configuring and Managing Tape Drives
SCF Reference Manual for the Storage Subsystem—529937-007
13-4
Displaying Configuration Information
Examples of INFO TAPE Detailed Reports
This example shows an INFO DETAIL report for a tape drive connected to a PMF
CRU:
-> INFO TAPE $DLT23, DETAIL
This example shows an INFO DETAIL report for a tape drive connected directly to an
FCSA on an Integrity NonStop NS-series server:
-> INFO TAPE $LTO3, DETAIL
STORAGE - Detailed Info TAPE configuration \COMM.$DLT23
Adapter Name.......................... $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-55
*Adapter Location (Group,Module,Slot).. (1,1,55)
*BackupCpu............................. 0
*Compression........................... ON
*Density............................... 6250
*DeviceID/PortName..................... 5
*HighPin............................... ON
*LUN................................... 0
*MaxOpens.............................. 4
*PrimaryCpu............................ 1
*Program............................... $SYSTEM.SYSTEM.OTPPROCP
*RecSize............................... 2048
*SAC Name.............................. $ZZSTO.#PMF.SAC-3.GRP-1.MOD-1.SLOT-55
*StartState............................ STARTED
STORAGE - Detailed Info TAPE configuration \OSMQA3.$LTO3
Adapter Name.......................... $ZZSTO.#FCSA.GRP-110.MOD-3.SLOT-4
*Adapter Location (Group,Module,Slot).. (110,3,4)
*BackupCpu............................. 1
*Compression........................... ON
*Density............................... 6250
*DeviceID/PortName..................... 210000E08B1755DC
*HighPin............................... ON
*LUN................................... 0
*MaxOpens.............................. 4
*PrimaryCpu............................ 0
*Program............................... $SYSTEM.SYSTEM.OTPPROCP
*RecSize............................... 2048
*SAC Name.............................. $ZZSTO.#FCSA.SAC-2.GRP-110.MOD-3.SLOT-4
*StartState............................ STARTED
Explanation of Fields
* indicates an attribute whose value you can change by using
an ALTER TAPE command.
AdapterName the name of the adapter where the tape drive is attached.
Adapter Location
(Group, Module, Slot)
the physical location of the adapter where the tape drive is
attached.
BackupCpu the processor number of the backup tape process.