SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-33
ADD PROFILE Command
PROFILE $ZZSTO.INTERNAL-DISK-groupnum
is a custom profile for enclosure groupnum. groupnum cannot have a leading
zero.
SENDTO STORAGE
directs the command to the storage subsystem. This attribute is required unless
you specified SENDTO STORAGE in a previous ASSUME command.
LIKE object
identifies an existing object whose attribute values are copied to the object affected
by this command. The object name must currently exist in the system
configuration, and the object type must match that of the object affected by this
command. If you specify LIKE, any attribute values that you explicitly specify
override the attribute values of the LIKE object.
attribute-spec
is one or more ADD PROFILE Attributes. Some disk attributes, like PRIMARYCPU,
are not kept in a profile because they are determined by the location of the disk.
ADD PROFILE Attributes
[ , AUDITTRAILBUFFER number ]
[ , AUTOLABEL { ON | OFF } ]
[ , AUTOREVIVE { ON | OFF } ]
[ , AUTOSELECT { ON | OFF } ]
[ , AUTOSTART { ON | OFF } ]
[ , CBPOOLLEN number ]
[ , FSTCACHING { ON | OFF | ENABLED } ]
[ , FULLCHECKPOINTS { DISABLED | ENABLED | FORCED } ]
[ , HALTONERROR number ]
[ , HIGHPIN { ON | OFF } ]
[ , LKIDLONGPOOLLEN number ]
[ , LKTABLESPACELEN number ]
[ , MAXLOCKSPEROCB number ]
[ , MAXLOCKSPERTCB number ]
[ , MIRRORING { OFF | ON } ]
[ , NAMEMASK { STANDARD | name } ]
[ , NONAUDITEDINSERT { ON | OFF } ]
[ , NUMDISKPROCESSES number ]
[ , OSSCACHING { ON | OFF } ]
[ , PHYSVOLSELECT { ON | OFF } ]
[ , POOL { $pool | EXCLUDE } ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , PROTECTDIRECTORY { CHECKPOINT | OFF | SERIAL } ]
[ , REVIVEBLOCKS number ]
[ , REVIVEINTERVAL number ]
[ , SERIALWRITES { DISABLED | ENABLED } ]
[ , SQLMXBUFFER number ]
[ , STARTSTATE { STARTED | STOPPED } ]