SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-44
ADD SCSI Command
PRIMARYPORTNAME number
is the fiber channel port name used by the primary path to the Open SCSI device.
The number should be entered as a 16 character hexadecimal number, without a
leading %H.
PRIMARYSAC { number | name }
is the SAC that controls the primary path to the device.
PROGRAM [[$vol.]subvol.]fileid
is the object file name of the IOP. If not specified, PROGRAM is:
$SYSTEM.SYSTEM.TDSCSI
If you specify PROGRAM as $SYSTEM.SYSTEM, the operating system first
searches for the file on $SYSTEM.SYSTEM and on the current SYSnn
subvolume.
RECSIZE number
is the configured record size for the device (in number of words). This value is
used by some utility programs when making requests to the IOP. number is in the
range 1 through 57344. The default is 4096.
SCSIID number
is the device ID of the Open SCSI device. Each device on the same SCSI
interface must have a unique device ID. number is in the range 0 through 15 (6
and 7 are reserved for the adapters). The default is 2.
STARTSTATE { STARTED | STOPPED }
specifies whether the IOP is available to other processes (STARTED) or
unavailable (STOPPED) when the system is loaded or reloaded. The default is
STARTED.
STRUCTAREASIZE number
is the size (in kilobytes) of the memory area used for data structures. number is in
the range 16 through 32. The default is 24.
TRACEBUFLEN number
is the size (in kilobytes) of the memory area used for internal tracing by the Open
SCSI IOP. number is in the range 32 through 65. The default is 33.
number is the SAC subdevice number on the adapter.
name is full name of the adapter location including the SAC number. For
example:
SNDA.SAC-1.GRP-1.MOD-1.SLOT-53