SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-48
ADD TAPE Command
SAC { number | name }
is the SAC that controls the primary path to the device.
STARTSTATE { STARTED | STOPPED }
specifies whether the IOP is available to other processes (STARTED) or
unavailable (STOPPED) when the system is loaded or reloaded. The default is
STARTED.
ADD TAPE Examples
See the procedure for Adding an Open SCSI Device on page 12-8.
•
To add a tape drive named $TAPE0 in group 02, slot 55:
-> ADD TAPE $TAPE0, SENDTO STORAGE, LOCATION (1,1,55)
•
To add a tape drive named $TAPE1 that is connected to SAC 1 in the SNDA in
group 01, slot 53:
-> ADD TAPE $TAPE1, SENDTO STORAGE, LOCATION (1,1,53), &
-> SAC 1, DEVICEID 4
number is the SAC subdevice number on the adapter.
name is the full name of the SAC. For example:
SNDA.SAC-1.GRP-1.MOD-1.SLOT-53 .