SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-53
ALTER DISK Command
[ , HALTONERROR number ]
[ , HIGHPIN { ON | OFF } ]
[ , IGNOREINCONSISTENCY ]
[ , LABEL $vol ]
[ , LKIDLONGPOOLLEN number ]
[ , LKTABLESPACELEN number ]
[ , MAXLOCKSPEROCB number ]
[ , MAXLOCKSPERTCB number ]
[ , MBACKUPDEVICEID { number | ( shelf, bay ) } ]
[ , MBACKUPLOCATION {group,module,slot) ]
[ , MBACKUPPORTNAME number ]
[ , MBACKUPSAC { number | name } ]
[ , MIRRORDEVICEID { number | ( shelf,bay ) } ]
[ , MIRRORLOCATION ( group,module,slot ) ]
[ , MIRRORLUN number ]
[ , MIRRORPORTNAME number ]
[ , MIRRORSAC { number | name } ]
[ , NONAUDITEDINSERT { ON | OFF } ]
[ , NUMDISKPROCESSES number ]
[ , OSSCACHING { ON | OFF } ]
[ , PHYSVOLSELECT { ON | OFF } ]
[ , POOL { $pool | EXCLUDE } ]
[ , PRIMARYCPU number ]
[ , PRIMARYDEVICEID { number | ( shelf,bay ) } ]
[ , PRIMARYLOCATION ( group,module,slot )
[ , PRIMARYLUN number ]
[ , PRIMARYPORTNAME number ]
[ , PRIMARYSAC { number | name } ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , PROTECTDIRECTORY { CHECKPOINT | OFF | SERIAL } ]
[ , REVIVEBLOCKS number ]
[ , REVIVEINTERVAL number ]
[ , REVIVEPRIORITY number ]
[ , REVIVERATE number ]
[ , SERIALWRITES { ENABLED | DISABLED } ]
[ , SQLMXBUFFER number ]
[ , STARTSTATE { STARTED | STOPPED } ]
[ , SWAPMIRROR ]
[ , VOLNAME $vol ]
[ , WRITEVERIFY { ON | OFF } ]
ALTNAME $vol
is an alternate volume name for the disk. This attribute changes the alternate
volume name on the label of the disk but does not change the system configuration
database.
If the storage subsystem tries to start a volume and the default volume name is
already in use, the volume is started using the alternate volume name. If the
alternate volume name is also in use, the storage subsystem uses the volume
name in the system configuration database and the disk is left in the DOWN state.
To use this attribute, see Naming a Magnetic Disk on page 6-26.