SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-76
ALTER PROFILE Command
PROFILE $ZZSTO.INTERNAL-DISK[-groupnum ]
is either the standard default profile, $ZZSTO.#INTERNAL-DISK, or a user-created
custom profile for enclosure groupnum. groupnum cannot have a leading zero.
attribute-spec
is one or more ALTER PROFILE Attributes.
ALTER PROFILE Attributes
[ , AUDITTRAILBUFFER number ]
[ , AUTOLABEL { ON | OFF } ]
[ , AUTOREVIVE { ON | OFF } ]
[ , AUTOSELECT { ON | OFF } ]
[ , AUTOSTART { ON | OFF } ]
[ , CBPOOLLEN number ]
[ , FSTCACHING { ON | OFF | ENABLED } ]
[ , FULLCHECKPOINTS { ENABLED | DISABLED | FORCED } ]
[ , HALTONERROR number ]
[ , HIGHPIN { ON | OFF } ]
[ , LKIDLONGPOOLLEN number ]
[ , LKTABLESPACELEN number ]
[ , MAXLOCKSPEROCB number ]
[ , MAXLOCKSPERTCB number ]
[ , MIRRORING { OFF | ON } ]
[ , NAMEMASK { STANDARD | name } ]
[ , NONAUDITEDINSERT { ON | OFF } ]
[ , NUMDISKPROCESSES number ]
[ , OSSCACHING { ON | OFF } ]
[ , PHYSVOLSELECT { ON | OFF } ]
[ , POOL { $pool | EXCLUDE } ]
[ , PROGRAM [[$vol.]subvol.]fileid ]
[ , PROTECTDIRECTORY { CHECKPOINT | OFF | SERIAL } ]
[ , REVIVEBLOCKS number ]
[ , REVIVERINTEVAL number ]
[ , SERIALWRITES { DISABLED | ENABLED } ]
[ , SQLMXBUFFER number ]
[ , STARTSTATE { STARTED | STOPPED } ]
AUDITTRAILBUFFER number
(TMF audit-trail volumes only) is the audit-trail buffer size (in megabytes) for an
audit volume. This value improves the performance of systems that use the
Remote Duplicate Database Facility. number is in the range 0 (no buffer specified)
through 768. The default is 0. Do not use this attribute for SQL/MX volumes.
If you specify too large or small a value, DP2 automatically sets the needed size.
If you specify a value of 0, DP2 automatically sets the size of the DP2 audit-trail
volume log cache, which defaults to 1 MB; that is, 256 audit-trail buffers.