SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-92
ALTER TAPE Command
PROGRAM [[$vol.]subvol.]fileid
is the object file name of the IOP. If not specified, PROGRAM is:
$SYSTEM.SYSTEM.OTPPROCP
If you specify the program file name location as $SYSTEM.SYSTEM, the operating
system first searches for the file there and on the current SYSnn subvolume.
RECSIZE number
is the configured record size for the device (in number of words). This value is
used by some utility programs when making requests to the IOP. number is in the
range 1 through 57344. The default is 4096.
SAC { number | name }
is the SAC that controls the primary path to the device.
STARTSTATE { STARTED | STOPPED }
specifies whether the IOP is available to other processes (STARTED) or
unavailable (STOPPED) when the system is loaded or reloaded. The default is
STARTED.
number Is the SAC subdevice number on the adapter.
name Is the full name of the SAC; for example:
SNDA.SAC-1.GRP-1.MOD-1.SLOT-53