SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-101
DELETE MON Command
DELETE DISK Example
See the procedure for Deleting a Magnetic Disk on page 6-34 or the procedure for
Deleting a Virtual Disk on page 10-11.
To remove a volume from the system configuration database:
-> DELETE $DATA01
DELETE MON Command
The DELETE MON command removes the SMF master process from the system
configuration database. The syntax is:
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
MON $ZSMS
is the SMF master process.
SEL state
specifies that the command affects only devices in the specified state.
DELETE MON Example
See the procedure for Deleting the SMF Master Process on page 4-6.
To delete the SMF master process from the system configuration database:
-> DELETE MON $ZSMS
DELETE POOL Command
The DELETE POOL command removes a storage pool from the system configuration
database. The command syntax is:
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
DELETE [ / OUT file-spec / ] MON $ZSMS [ , SEL state ]
DELETE [ / OUT file-spec / ] POOL $pool
[ , IGNOREINCONSISTENCY ] [ , SEL state ]