SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-102
DELETE PROFILE Command
POOL $pool
is the storage pool process.
IGNOREINCONSISTENCY
specifies that a command can create an inconsistency between the system
configuration database and the SMF catalogs maintained by the SMF manager
process, storage pools, and virtual disks.
Use this attribute only if you understand SMF architecture and know how to restore
consistency between the system configuration database and the SMF catalogs.
The Softdoc for the T1083 product describes several inconsistencies and the
procedures for reconciling them.
SEL state
specifies that the command affects only devices in the specified state.
DELETE POOL Example
See the procedure for Deleting a Storage Pool on page 9-10.
To delete a storage pool from the system configuration database:
-> DELETE $POOL00
DELETE PROFILE Command
The DELETE PROFILE command removes a user-configured profile from the system
configuration database. The syntax is:
Wild-card characters are supported.
OUT file-spec
directs all SCF output to the specified file.
PROFILE $ZZSTO.#INTERNAL-DISK-groupnum
is a custom profile for enclosure groupnum. groupnum cannot have a leading
zero.
DELETE PROFILE Example
See Deleting a Custom Profile on page 6-11.
DELETE [ / OUT file-spec / ]
PROFILE $ZZSTO.#INTERNAL-DISK-groupnum