SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-105
INFO DISK Command
INFO ADAPTER Examples
•
To display information about the PMF CRU adapter in group 01, slot 50:
-> INFO $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50
See the display and explanation under Example of an INFO PMF ADAPTER
Report on page 11-2.
•
To display detailed information about the PMF CRU adapter in group 01, slot 50:
-> INFO $ZZSTO.#PMF.GRP-1.MOD-1.SLOT-50, DETAIL
See the display and explanation under Example of a Detailed INFO PMF
ADAPTER Report on page 11-3.
INFO DISK Command
The INFO DISK command displays configuration information about a magnetic or
virtual disk. The syntax is:
Wild-card characters are supported.
BAD
(magnetic disks only) displays information about any bad sectors.
CACHE
(magnetic disks only) displays current cache information.
CONFIG
(magnetic disks only) displays current configuration information.
DETAIL
displays detailed configuration information.
LABEL
(magnetic disks only) displays disk label information.
INFO [ / OUT file-spec / ] DISK $disk
[ , { BAD | CACHE | CONFIG | DETAIL | LABEL | LOG |
OBEYFORM | SECTOR [ % | %H ] lsa } ]
[ , POOL $pool ] [ , SEL state ]
[ , SUB { ALL | MAGNETIC | VIRTUAL } ]