SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-106
INFO DISK Command
LOG
(magnetic disks only) displays information about spared sectors.
OBEYFORM
displays information about the object in the format used in an ADD command.
POOL $pool
specifies that the command is performed only on disks associated with the
specified storage pool.
SECTOR [ % | %H ] lsa
(magnetic disks only) displays information about the disk sector at logical sector
address lsa. lsa can be expressed as an octal (%), hexadecimal (%H), or
decimal number.
SEL state
specifies that the command affects only devices in the specified state.
SUB { ALL | MAGNETIC | VIRTUAL }
specifies that the command affects only disks of the specified type. The default is
ALL.
INFO DISK Examples
•
To display information about a magnetic disk:
-> INFO $AUDIT
See the display and explanation under Example 1: An INFO Report for a Magnetic
Disk on page 5-3.
•
To display detailed information about a magnetic disk:
-> INFO $SYSTEM, DETAIL
See the display and explanation under Example 2: A Detailed INFO Report for a
Magnetic Disk on page 5-3.
•
To display information about a virtual disk:
-> INFO $VDISK00
See the display and explanation under Example of an INFO DISK Summary
Report on page 10-4.
•
To display detailed information about a virtual disk:
-> INFO $VDISK00, DETAIL