SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-108
INFO POOL Command
INFO MON Examples
•
To display information about the SMF master process:
-> INFO $ZSMS
See the display and explanation under Example of an INFO MON Report on
page 4-2.
•
To display detailed information about the SMF master process:
-> INFO $ZSMS , DETAIL
See the display and explanation under Example of a Detailed INFO MON Report
on page 4-2.
INFO POOL Command
The INFO POOL command displays configuration information about a storage pool.
The syntax is:
Wild-card characters are supported.
POOL $pool
is the storage pool process.
DETAIL
displays detailed configuration information.
OBEYFORM
displays information about the object in the format used in an ADD command.
SEL state
specifies that the command affects only devices in the specified state.
INFO POOL Examples
•
To display information about a storage pool process:
-> INFO $POOL1
See the display and explanation under Example of an INFO POOL Report on
page 9-2.
INFO [ / OUT file-spec / ] POOL $pool
[ , { DETAIL | OBEYFORM } ] [ , SEL state ]