SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-109
INFO PROFILE Command
•
To display detailed information about a storage pool process:
-> INFO $POOL1 , DETAIL
See the display and explanation under Example of a Detailed INFO POOL Report
on page 9-3.
INFO PROFILE Command
The INFO PROFILE command displays configuration information about the specified
profile. The syntax is:
Wild-card characters are supported.
PROFILE $ZZSTO.#INTERNAL-DISK[-groupnum ]
is either the standard default profile, $ZZSTO.#INTERNAL-DISK, or a user-created
custom profile for enclosure groupnum. groupnum cannot have a leading zero.
OBEYFORM
displays information about the object in the format used in an ADD command.
INFO PROFILE Examples
•
To display detailed information about the standard default internal-disk profile:
-> INFO $ZZSTO.#INTERNAL-DISK
See the display and explanation under Example of an INFO PROFILE Report on
page 5-11.
•
To display detailed information about the internal-disk profile for group 03 disks
(assuming you have created one):
-> INFO $ZZSTO.#INTERNAL-DISK-3
•
To display information about all disk profiles on the system:
-> INFO PROFILE $ZZSTO.*
INFO [ / OUT file-spec / ]
PROFILE $ZZSTO.#INTERNAL-DISK[-groupnum ]
[ , OBEYFORM ]