SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Objects
SCF Reference Manual for the Storage Subsystem—529937-007
2-9
The PROFILE Object
The PROFILE object has this format:
$ZZSTO
is the storage subsystem manager.
INTERNAL-DISK
is the type of disk for which a storage subsystem profile can be configured.
-groupnum
is the enclosure number to which a user-configured profile applies. groupnum
cannot have a leading zero.
The default standard profile has no group number and can be used to preconfigure
any internal disk inserted in a slot in any enclosure.
To tailor internal disk profiles based on which enclosure houses the disk, create
additional profiles by specifying the group number of the enclosure as shown in
this list. The enclosure number you specify must already exist. For details about
how to create a profile, see Creating a Custom Profile on page 6-9. Valid group
numbers are:
Wild-card characters are supported.
Examples
•
The PROFILE object for any disk slot in any enclosure is:
$ZZSTO.INTERNAL-DISK
•
The PROFILE object for disk slots in group 01 is:
$ZZSTO.INTERNAL-DISK-1
$ZZSTO.INTERNAL-DISK[-groupnum ]
groupnum Enclosures
1-8 Processor enclosures
11-19 I/O enclosures attached to processor group 1
21-29 I/O enclosures attached to processor group 2
31-39 I/O enclosures attached to processor group 3
41-49 I/O enclosures attached to processor group 4
51-59 I/O enclosures attached to processor group 5
61-69 I/O enclosures attached to processor group 6
71-79 I/O enclosures attached to processor group 7
81-89 I/O enclosures attached to processor group 8