SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands

SCF Reference Manual for the Storage Subsystem—529937-007

14-138

STATUS Command

The STATUS command displays current status information about an object.

Supported objects are:

STATUS ADAPTER Command

The STATUS ADAPTER command displays current information about a ServerNet

adapter. The syntax is:

Wild-card characters are supported.

OUT file-spec

directs all SCF output to the specified file.

ADAPTER $ZZSTO.#type.GRP-g.MOD-m.SLOT-s

is a ServerNet adapter of type PMF, IOMF, or SNDA. g cannot have a leading zero.

DETAIL

displays detailed status information.

FIRMWARE

displays only the firmware currently running in each SAC.

SACS

displays detailed status for SACs but does not list devices.See Example of a

STATUS FCSA ADAPTER, SACS on page 11-15.

SERVERNET

displays only the status of the adapter’s ServerNet paths. This attribute applies

only to Fibre Channel ServerNet adapters (FCSAs). See Example of a STATUS

FCSA ADAPTER, SERVERNET Report on page 11-16.

ADAPTER page 14-138 SAC page 14-143

DISK page 14-139 SCSI page 14-145

MON page 14-141 SUBSYS page 14-146

POOL page 14-142 TAPE page 14-146

STATUS [ / OUT file-spec / ]

ADAPTER $ZZSTO.#type.GRP-g.MOD-m.SLOT-s

[ , { DETAIL | FIRMWARE | SACS | SERVERNET | VPROCS } ]