SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-143
STATUS SAC Command
See the display and explanation under Example of a STATUS POOL Report on
page 9-5.
•
To display detailed status of a storage pool process:
-> STATUS $POOL00, DETAIL
See the display and explanation under Example of a Detailed STATUS POOL
Report on page 9-5.
•
To display the status of all storage pool processes in the STOPPED state:
-> STATUS POOL $*, SEL STOPPED
STATUS SAC Command
The STATUS SAC command displays current status information about devices
connected to a SAC on an FCSA.
The command syntax is:
OUT file-spec
directs all SCF output to the specified file.
#sac-name
is the name of the SAC in the form FCSA.SAC-sac.GRP-group.MOD-
module.SLOT-slot. For example:
#FCSA.SAC-2.GRP-110.MOD-2.SLOT-5
attribute-spec
is one of STATUS SAC Attributes
STATUS [ /OUT file-spec / ] SAC $ZZSTO.#sac-name
[ , attribute-spec ]