SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-144
STATUS SAC Command
STATUS SAC Attributes
[ , EMU , DEVICEID (shelf, 0) ]
[ , EMULIST ]
[ , LOCATION , PORTNAME wwn ]
[ , PATHSTATUS, DEVICEID (shelf, 0) ]
[ , REPLACE , DEVICEID (shelf, 99) ]
DEVICEID (shelf , 0)
specifies the shelf number of the enclosure to which the command applies. The
bay number 0 designates the disk-drive enclosure itself. The bay number 99
designates the EMU.
EMU
displays a small subset of the inventory and status information from the EMU.
EMULIST
displays the shelf worldwide names (WWNs) for any EMUs visible through the
SAC.
LOCATION
displays the shelf and bay of the disk with the specified PORTNAME.
PATHSTATUS
displays the status of the path to the EMU.
PORTNAME wwn
specifies the worldwide name (WWN) of a port entered as a 16-character
hexadecimal number without a leading %H.
REPLACE
displays an error message if the $ZFCnn process is busy updating any EMU
firmware. Otherwise, the command produces no display.
STATUS SAC Command Examples
This command shows the WWNs for the EMUs in the disk-drive enclosures connected
to SAC 2:
-> STATUS SAC $ZZSTO.#FCSA.SAC-2.GRP-111.MOD-2.SLOT-1, EMULIST
STORAGE - Emulist Status SAC \OSM2.$ZZSTO.#FCSA.SAC-2.GRP-111.MOD-2.SLOT-1
Shelf WWN
1 500508B3005833C7
2 500508B3006814C5