SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Commands
SCF Reference Manual for the Storage Subsystem—529937-007
14-147
STATUS TAPE Command
TAPE $tape
is the name of the tape device.
DETAIL
displays detailed status information.
STATUS TAPE Examples
•
To display the status of a tape drive:
-> STATUS $TAPE0
See the display and explanation under Example of a STATUS TAPE Report on
page 13-5.
•
To display detailed status of a tape drive:
-> STATUS $TAPE0, DETAIL
See the display and explanation under Example of a Detailed STATUS TAPE
Report on page 13-6.