SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Objects
SCF Reference Manual for the Storage Subsystem—529937-007
2-11
The TAPE Object
which configures and manages all storage objects in the storage subsystem. For more
information, see Section 3, Using the Storage Subsystem Manager.
The SUBSYS object has this format:
$ZZSTO
is the storage subsystem manager process.
Wild-card characters are supported.
Example
$ZZSTO
The TAPE Object
The TAPE object represents a specific tape drive, which is a storage device for
archiving data. For more information, see Section 13, Configuring and Managing Tape
Drives.
The TAPE object has this format:
$tape-name
is the name of the tape process controlling the tape device.
Wild-card characters are supported.
Examples
$TAPE0
$TAPE1
TAPE Object States
The object state of a TAPE object provides current status information about a tape
drive.
$ZZSTO
$tape-name
Table 2-6. TAPE Object States
State Description
STARTED The tape drive is available.
STOPPED The tape drive is not available.