SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-8
Storage Subsystem Error Messages
Recovery. Report this problem immediately. See If You Have to Contact Your Service
Provider on page B-1.
00017
err-num
is the error number returned from the CONFIG_GETINFO_ system procedure.
err-detailnum
is the error detail number returned from the CONFIG_GETINFO_ system
procedure.
Cause. An unexpected error was returned from the CONFIG_GETINFO_ system
procedure when it was called by the storage subsystem manager process ($ZZSTO).
Effect. The command is not executed. SCF waits for the next command.
Recovery. Retry the command. If the problem persists, contact your service
provider. See If You Have to Contact Your Service Provider on page B-1.
00018
objtype
is the object type of the object you specified with the command.
devname
is the name of the device you specified in the command.
text
is additional information about the error.
Cause.
•
The processor or the pair of processors that the I/O process (IOP) is configured for
are not started.
•
The IOP is not running.
•
The configuration is not configured in the configuration database.
Effect. The command is not executed. SCF waits for the next command.
STORAGE 00017 Unexpected error returned from CONFIG_GETINFO_,
error: err-num, error detail: err-detailnum.
STORAGE 00018 objtype devname does not exist: text