SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-14
Storage Subsystem Error Messages
Recovery. Add the device to the system configuration using the SCF ADD command.
If the problem persists, contact your service provider. See If You Have to Contact Your
Service Provider on page B-1.
00034
command
is the command you specified.
value
is the value you specified in the command.
Cause. The adapters controlling the device specified in the command are not
controlled by the same processors.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the values and retry the command. The adapters controlling the
device must be controlled by the same processors.
00035
command
is the command you specified.
Cause. The adapters controlling the device specified in the command do not have the
same product number.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the product numbers and retry the command. The adapters
controlling the device must have the same product number.
00036
command
is the command you specified.
STORAGE 00034 command failed. Mismatch between adapter
ACCESSLIST. Parameter: value.
STORAGE 00035 command failed. Mismatch between adapter
product numbers.
STORAGE 00036 command failed. processor cannot access the
adapters controlling the device.