SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-23
Storage Subsystem Error Messages
00064
cmd
is the command you specified.
cru-info
is additional information about the CRU in the command you specified.
errnum
is the error associated with this failure.
Cause. While trying to complete the requested command, communication with the
CRU was interrupted.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Verify the hardware is actually present and connected correctly. If the
problem persists, contact your service provider. See If You Have to Contact Your
Service Provider on page B-1.
00065
cmd
is the command you specified.
sacpath
is the path of the ServerNet addressable controller (SAC) specified in the
command.
Cause. You might have issued a command with an invalid SAC location. There is no
SAC in the specified location.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Verify the hardware is actually present and connected correctly. If the
problem persists, contact your service provider. See If You Have to Contact Your
Service Provider on page B-1.
STORAGE 00064 cmd failed. No CRU info; cru-info error:
errnum
STORAGE 00065 cmd failed. No SAC present in sacpath.