SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-35
Storage Subsystem Error Messages
00094
Cause. When you entered the command, you assigned the same fabric to access
both paths to the disk.
Effect. The command is executed. This is a warning.
Recovery. Reissue the command and assign a separate path to each path.
00095
Cause. The command resulted in an internal NonStop C (NSC) language module
error.
Effect. The command is not executed. SCF waits for the next command.
Recovery.
1. Retry the command.
2. If the problem persists, contact your service provider. See If You Have to Contact
Your Service Provider on page B-1.
00096
Cause. A SWITCH ADAPTER command returned a count (n) of the number of paths
that did not switch, along with a list of the unswitched paths.
Effect. SCF waits for the next command.
Recovery. Handle those exceptions individually.
00097
Cause. A PRIMARY SUBSYS command returned a count (n) of the number of IOPs
that did not move to the other processor, along with a list of those IOPs.
Effect. SCF waits for the next command.
STORAGE 00094 Both paths of the disk process are assigned the
same fabric.
STORAGE 00095 Unable to process the command due to an
internal NSC error.
STORAGE E00096 Unable to perform n of the requested path
switches: process-path-list
STORAGE E00097 Unable to perform n of the requested IOP
primary changes: process-list