SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-41
Storage Subsystem Error Messages
command
is the SCF command that you issued.
Cause. The command you issued is not allowed for a disk that contains active audit
trail files.
Effect. The command is not executed. SCF waits for the next command.
Recovery.
1. Verify you issued the command for the correct disk.
2. If you issued the command for the correct disk, you must stop the Transaction
Management Facility (TMF) subsystem and then reissue the command.
01005
command
is the SCF command that you issued.
Cause. The command you issued is not allowed for a disk that is protected by the
TMF subsystem.
Effect. The command is not executed. SCF waits for the next command.
Recovery.
1. Verify you issued the command for the correct disk.
2. Verify the state of the disk within the TMF subsystem. If needed, change the
device's state in the TMF subsystem before retrying the operation. Refer to the
TMF Operations and Recovery Guide for additional information.
01006
diskpath
is the disk path that you specified in the command.
Cause. You specified a disk path that does not exist.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Determine the correct disk path and reissue the command.
STORAGE 01005 command rejected, disk is TMF protected.
STORAGE 01006 Invalid disk path specified: diskpath.