SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-55
Storage Subsystem Error Messages
is the number of open files on the disk.
Cause. You issued a STOPOPENS command for a disk with open files.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Informational message only; no corrective action is required.
01044
errnum
is the error number provided by the file-system.
Cause. Something is preventing the Autoselect change from finishing.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the problem indicated by the file-system error code and reissue the
command.
01045
errnum
is the error number provided by the file-system.
Cause. Something is preventing the Physvolselect change from finishing.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the problem indicated by the file-system error code and reissue the
command.
01046
Cause. This command, if executed, would leave the storage pool in an inconsistent
state.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Remove the disk from the storage pool and reissue the command.
STORAGE 01044 ALTER DISK $DATA00, Autoselect change failed,
error errnum
STORAGE 01045 ALTER DISK $DATA00, Physvolselect change
failed, error errnum
STORAGE 01046 Not allowed: The disk belongs to a storage
pool.