SCF Reference Manual for the Storage Subsystem (G06.24+, H06.03+)

Storage Subsystem Error Messages
SCF Reference Manual for the Storage Subsystem—529937-007
B-56
Storage Subsystem Error Messages
01047
Cause. This command, if executed, would leave the TMF product in an inconsistent
state.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Disable the disk under the TMF product and reissue the command.
01048
secnum
is the sector number you specified with the command.
maxsecnum
is the largest number allowed for the sector number.
Cause. You have specified a sector number that is beyond the last sector number on
the disk.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Determine the correct sector number and reissue the command.
01049
cmd
is the command that you issued.
Cause. You issued a command to a nonmirrored disk that can only be used for
mirrored disks.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Determine the correct disk, or change the command you are issuing to the
nonmirrored disk.
STORAGE 01047 Not allowed: The disk is audited.
STORAGE 01048 Sector secnum is out of range. Maximum is
maxsecnum
STORAGE 01049 cmd rejected, disk is not mirrored.